کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
5008334 1461846 2017 20 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
A capacitance-based solution to monitor absolute crack length in four-point bending test: Modelling and experiments
ترجمه فارسی عنوان
یک راه حل مبتنی بر خازن برای نظارت بر طول کرک کامل در آزمون خمش 4 نقطه: مدل سازی و آزمایش
کلمات کلیدی
آزمون خمش چهار نقطه، ظرفیت نظارت طول مدت
ترجمه چکیده
آزمایش خمش چهار نقطه به طور گسترده ای برای مشخص کردن قدرت خمشی یا رفتار خستگی ساختار چسبنده و چند لایه استفاده می شود. این مطالعه یک روش مبتنی بر خازن را برای نظارت دقیق و در زمان واقعی انتشار ترک در رابط نمونه های ساندویچ پرتو گزارش می دهد. نمونه مثل یک سنسور ساخته شده است، که در آن اتصال خازنی بین پرتوهای بالا و پایین به عنوان یک سنج برای نظارت بر انتشار ترک استفاده می شود. یک مدل کاملا تحلیلی از نمونه تحت آزمایش توسعه یافته است. یک بیان تحلیلی ساده به دست می آید که یک مکالمه یک به یک را بین ظرفیت اندازه گیری شده و طول کرک در یک بار مشخص ایجاد می کند. این بیان اجازه می دهد تا بازیابی مستقیم طول کامل کرک. سپس مدل با داده های تجربی مقایسه می شود، نشان دهنده هماهنگی سازگار بدون هیچ گونه پارامتر مناسب می باشد. برآوردهای دقت مدل حسگر نیز داده شده است.
موضوعات مرتبط
مهندسی و علوم پایه شیمی الکتروشیمی
چکیده انگلیسی
Four-point bending tests are widely used to characterise the flexural strength or fatigue behaviour of adhesive joint and multilayer structure. The present study reports a capacitance-based method to monitor accurately and in real-time the crack propagation at the interface of sandwich-beam specimens. The specimen behaves like a built-in sensor, where the capacitive coupling between the upper and lower beams is used as a gauge for the crack propagation monitoring. A fully-analytical model of the specimen under test is developed. A simple analytical expression is obtained that establishes a one-to-one correspondence between the measured capacitance and the crack length at a given load. This expression allows the direct retrieval of absolute crack length. The model is then compared to experimental data, showing consistent agreement without any fitting parameters. Estimates of the sensor model accuracy are also given.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Sensors and Actuators A: Physical - Volume 254, 1 February 2017, Pages 145-151
نویسندگان
, , , , , , ,