Electrical impedance matching networks based on filter structures for high frequency ultrasound transducers

An electrical impedance matching (EIM) network is proposed to achieve the broad bandwidth of a high frequency ultrasound transducer and to improve the signal-to-noise ratio (SNR) of an ultrasound image. The proposed EIM network is based on a general filter structure, i.e., either low-pass filter (LPF) or high-pass filter (HPF) structure composing a capacitor and an inductor. Either filter type can be selected depending on the spectral characteristics of a transducer. The prominent advantage of the proposed method is the capability to broaden the spectrum of a transducer by means of modifying its original spectrum. The values of the electronic components are computed with the measured electrical impedances of a transducer and an imaging system. In this paper, the EIM between a custom-made 50 MHz ultrasound needle transducer and a commercial pulser/receiver system was conducted to verify the characteristics and performance of the proposed method. The experimental results demonstrated that the proposed EIM network is capable of achieving the best performance of the transducer, i.e., broad bandwidth and high SNR that are desirable for the high quality of high frequency ultrasound images.