کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5009147 | 1462043 | 2017 | 10 صفحه PDF | دانلود رایگان |
- Highly sensitive mixed potential type gas sensor based on YSZ and CdMoO4-SE was first developed for detection of acetone.
- The device utilizing CdMoO4-SE exhibited the highest response of â133.5 mV to 100 ppm acetone at 625 °C.
- The sensitivity of the fabricated sensor to acetone in the concentration range of 5-300Â ppm was â84Â mV/decade.
- The sensor also showed good repeatability, selectivity, moisture resistance and stability.
A highly sensitive mixed potential type gas sensor based on stabilized zirconia (YSZ) and CdMoO4 sensing electrode (SE) was developed and used for detection of acetone at 625 °C. By comparing the sensing performance for different devices fabricated, the sensor utilizing CdMoO4-SE exhibited the highest response value (â133.5 mV) to 100 ppm acetone at 625 °C, and even could achieve low detection limit of 500 ppb at 625 °C. The sensor attached with CdMoO4-SE displayed high sensitivity of â84 mV/decade to acetone in the range of 5-300 ppm at 625 °C. The present device also showed good repeatability, selectivity to certain deleterious gases, moisture resistance and acceptable drifts in 10 days measured period at 625 °C, demonstrating great potential for practical application in acetone sensing detection. Additionally, the sensor involving mixed potential mechanism was proposed and further clarified by polarization curve.
Journal: Sensors and Actuators B: Chemical - Volume 248, September 2017, Pages 9-18