LES-FEM coupled analysis and experimental research on aerodynamic noise of the vehicle intake system

To thoroughly explore the aerodynamic noise in order to achieve a more efficient engineering application for a vehicle intake system, the large eddy simulation and the finite element method were employed in numerical simulations, and the aeroacoustic characteristics were validated through the experimental data. In this research, the k-ε model was adopted to simulate the steady state fluid dynamic, and the static pressure loss was consistent with the bench test data, indicating the computational fluid dynamics model was valid. After acquiring the data from the steady state simulation, the fluctuating pressure of the inner wall was calculated based on the transient state calculation results from the large eddy simulation. Thereafter, the finite element method was used to determine the acoustic performance of the intake system. By comparing the experiment data, the noise reduction indicated that the intake system performed well at various frequencies, e.g. 320 Hz, 520 Hz and 770 Hz, but poorly at 140 Hz, 210 Hz, 420 Hz and 600 Hz. Finally, the far-field aerodynamic noise was calculated based on FW-H equation, and the output showed that the noise of each measuring point agreed well with the test results in trend. In particular, the inlet sound pressure spectrum almost fit the test data with the airflow of 300 m3/h, and several amplitude peaks appeared at 210 Hz, 420 Hz and 600 Hz, corresponding to the low-attenuation region of the noise reduction curve. Moreover, the specific frequencies were not shifted with the airflow changing. In conclusion, the numerical simulation method proves to be effective in calculating the aerodynamic noise accurately.