Performance of a snoring noise control system based on an active partition

This paper proposes an active partition that can be placed between a snorer and a non-snorer on a bed to reduce the snoring noise around the non-snorer ears by integrating a rigid finite size passive partition with a two channel active noise control system. The noise reduction performance of the passive partition on a bed with a headboard is studied first, where the effects of the height and the width of the partition are discussed. Due to the limited partition size, the attenuation for the low-frequency diffracted noise is not sufficient, so two loudspeakers are proposed to be installed on the partition as the secondary sources to increase the overall noise attenuation. Both numerical simulations and experiments are carried out to demonstrate the feasibility of the proposed integrated snoring noise control system, and the results show that the proposed active partition can achieve over 10 dB noise attenuation at non-snorer ears in the 1/3 octave bands from 80 to 1000 Hz.