کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5013947 | 1463050 | 2017 | 16 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Applicability of new CTOD calculation formula to various a0/W conditions and BÂ ÃÂ B configuration
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی مکانیک
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
In the previous report, the authors proposed a new CTOD calculation formula which shows good correspondence with actual CTOD in large thickness materials by introduction of a correction parameter for varied blunting shapes at the crack tip by a strain hardening exponent. However, this formula is limited to the standard range of the crack depth to width ratio, a0/W from 0.45 to 0.55, and hence did not satisfy strong demand for evaluation of a wider a0/W range. Actually, ISO15653 can cover a wider a0/W range from 0.01 to 0.70 in order to respond to this demand, considering the description in the Annex, which specifies a J-integral based CTOD calculation formula. In the context of this situation, the authors' recent report revealed that the plastic hinge model can be applied to a0/W conditions other than the range from 0.45 to 0.55 based on detailed observation of plastic deformation for wider a0/W conditions. Coordination of the rotational center is steady regardless of the load level and strain hardening exponent. In this study, first, based on a BÂ ÃÂ 2B configuration, expansion of the applicable a0/W range for the proposed CTOD calculation formula is investigated with some modification of the proposed formula. Second, application to the BÂ ÃÂ B type specimen is investigated. Finally, validation of the FEM analysis for BÂ ÃÂ B type specimens by the silicone rubber replica method is presented.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Engineering Fracture Mechanics - Volume 179, 15 June 2017, Pages 375-390
Journal: Engineering Fracture Mechanics - Volume 179, 15 June 2017, Pages 375-390
نویسندگان
Tomoya Kawabata, Tetsuya Tagawa, Yoichi Kayamori, Mitsuru Ohata, Yoichi Yamashita, Masao Kinefuchi, Hitoshi Yoshinari, Shuji Aihara, Fumiyoshi Minami, Hiroshi Mimura, Yukito Hagihara,