کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5014783 | 1463459 | 2017 | 12 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Plywood made from plasma-treated veneers: Shear strength after shrinkage-swelling stress
ترجمه فارسی عنوان
تخته سه لا ساخته شده از ونیز های تحت درمان با پلاسما: استحکام برشی پس از استرس تورم انقباضی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
روکش چوب راش، کیفیت باندینگ، درمان پلاسما، مقاومت برشی،
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی مکانیک
چکیده انگلیسی
Thermally modified and unmodified beech veneers in untreated and plasma-treated state were immersed in melamine solution at different concentrations. The plasma pre-treated veneers exhibited significantly higher melamine loads than the untreated veneers at equal impregnation duration. Subsequently the veneers were manufactured into 5-layer plywood boards; the plywood samples then underwent an extreme testing procedure based on DIN-EN 314-1/2 in order to proof the bonding quality by means of shear strength. The plywood boards made of plasma pre-treated veneers exhibited up to 2.7-fold improvement in shear strength compared to plywood made of untreated veneers. Results differed markedly based on material (unmodified/thermally modified veneer) and concentration of melamine solution.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Adhesion and Adhesives - Volume 78, October 2017, Pages 212-215
Journal: International Journal of Adhesion and Adhesives - Volume 78, October 2017, Pages 212-215
نویسندگان
R. Wascher, G. Avramidis, C. Kühn, H. Militz, W. Viöl,