کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5014800 | 1463461 | 2017 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Design of functionally graded joints using a polyurethane-based adhesive with varying amounts of acrylate
ترجمه فارسی عنوان
طراحی مفاصل درجه بندی شده با استفاده از یک چسب بر اساس پلی اورتان با مقادیر مختلف آکریلات
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
تجزیه و تحلیل استرس عنصر محدود، توزیع استرس، خواص مکانیکی چسب، طراحی مشترک عملکرد باندل درجه بندی شده،
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی مکانیک
چکیده انگلیسی
Adhesives with graded properties along the bondline are being developed to increase the strength of adhesively bonded joints. Efforts to do this in the past have resulted in mixed results. Two adhesive parameters need to be considered: the geometry of the gradation and the material properties of the adhesive at different gradation levels. In order to consider both of these aspects, a computational model was created to aid in not only the design of adhesive gradations but also judge whether a specific adhesive gradation method will be able to result in strength increases. In this study, the model was introduced and compared with published results. A new adhesive gradation system was created by using a polyurethane-based adhesive with varying amounts of acrylate, and a numerical analysis was performed to determine the potential advantages of the adhesive gradation.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Adhesion and Adhesives - Volume 76, July 2017, Pages 38-46
Journal: International Journal of Adhesion and Adhesives - Volume 76, July 2017, Pages 38-46
نویسندگان
Scott E. Stapleton, Julia Weimer, Jan Spengler,