کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
5015566 1464048 2017 14 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
A nonlinear dynamic uniaxial strength criterion that considers the ultimate dynamic strength of concrete
ترجمه فارسی عنوان
یک ضریب قدرت غیرمستقیم یکپارچه پویا که قدرت دینامیکی نهایی بتن را در نظر می گیرد
ترجمه چکیده
نتایج آزمون های موجود و معادلات نیمه تجربی مقاومت بتن وابسته به سرعت، قدرت دینامیکی واقعی را بیش از اندازه افزایش داده اند، زیرا آنها بین قدرت دینامیکی واقعی مربوط به اثرات نرخ فشار و مقاومت اضافی ناشی از اثرات ناشی از آن تفاوت نمی کنند. با این حال، قدرت نهایی بتن در میزان فشار بیش از مقدار معینی وجود دارد. این مقاله یک معیار مقاومت یک جانبه یکنواختی غیر خطی برای بتن را بر اساس تجزیه و تحلیل مکانیسم های فیزیکی حاکم بر رفتار وابسته به سرعت کششی از مقاومت بتن ارائه می دهد. معیار پیشنهادی قادر به توصیف نیروی دینامیکی واقعی است و برای نشان دادن قدرت نهایی در سرعت بالای بتن استفاده می شود. نتایج به دست آمده از دو گروه از آزمونهای فشاری یکسانی پویا و دو گروه از آزمونهای کششی یکسانی پویا برای تایید معیار استفاده شده است. علاوه بر این، پارامترهای فیزیکی توصیه شده در معیار با تجزیه و تحلیل نتایج آزمون آماری فشرده سازی و کشش یکپارچه پویا به دست می آیند. پارامترهای توصیه شده در معیار برای مطالعه مقاومت دینامیکی بتن هنگامی که تست های دینامیکی امکان پذیر نمی باشند، می تواند مورد استفاده قرار گیرد و برای پیش بینی مقاومت دینامیکی در نرخ سایش بالا هنگامی که آزمایش ها در نرخ پایین فشار انجام می شود.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی مکانیک
چکیده انگلیسی
The existing test results and semi-empirical equations of the rate-dependent concrete strength have overestimated the actual dynamic strength because they do not distinguish between the actual dynamic strength related to the strain rate effects and the additional resistance caused by inertial effects. However, an ultimate strength of concrete exists at a strain rate exceeding a certain value. This paper proposes a nonlinear dynamic uniaxial strength criterion for concrete based on an analysis of the physical mechanisms governing the strain-rate-dependent behavior of concrete strength. The proposed criterion is able to describe the actual dynamic strength and to reflect the ultimate strength at a high strain rate of concrete. The results from two groups of dynamic uniaxial compressive tests and two groups of dynamic uniaxial tensile tests are used to verify the criterion. Moreover, the recommended physical parameters in the criterion are obtained by analyzing the statistical test results of dynamic uniaxial compression and tension. The recommended parameters can be used in the criterion to study the dynamic strength of concrete when dynamic tests are not feasible, and to predict the dynamic strength at high strain rates when tests are performed at lower strain rates.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Impact Engineering - Volume 103, May 2017, Pages 124-137
نویسندگان
, , , ,