کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5016820 | 1465585 | 2017 | 18 صفحه PDF | دانلود رایگان |
- Two similarly oriented grains are studied after 9% tension with 3DXRD and modelling.
- The measured spatial orientation spread is qualitatively predicted using the ALAMEL model.
- Shear at grain boundaries is identified as the dominant grain interaction mechanism.
- The same slip systems operate throughout each grain, but with different relative activities.
The spatially resolved intragranular orientation spread in two representative bulk grains of interstitial-free steel deformed to 9% tension has been investigated. A three-dimensional X-ray diffraction microscopy experiment revealed that the two similarly oriented grains are both embedded in local environments representing the bulk texture, yet their deformation-induced rotations are very different. The ALAMEL model is employed to analyse the grain interaction mechanisms. Predictions of this model qualitatively agree with the directionality and magnitude of the experimental orientation spread. However, quantitative agreement requires fine-tuning of the boundary conditions. The majority of the modelled slip is accounted for by four slip systems also predicted to be active by the classical Taylor model in uniaxial tension, and most of the orientation spread along the grain boundaries is caused by relative variations in the activities of these. Although limited to two grains, the findings prove that shear at the grain boundaries as accounted for by the ALAMEL model is a dominant grain interaction mechanism.
Journal: International Journal of Plasticity - Volume 88, January 2017, Pages 108-125