کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5017829 | 1466727 | 2017 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Surface void suppression for pure copper by high-speed laser scanner welding
ترجمه فارسی عنوان
سرکوب سطحی خالص برای مس خالص با استفاده از جوشکاری با سرعت بالا لیزر اسکنر
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
جوش لیزری، فلز مس، اسکنر، سطح خالی،
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
چکیده انگلیسی
Welding of copper was conducted using a single-mode fiber laser rotated at a high speed by a galvano scanner. The rotation diameter and frequency were changed to investigate the effect of the beam rotation on the welding quality. The rotation diameter changed from 0.3 to 1.0Â mm and the rotation frequency changed from 77 to 285Â Hz. The weld depth obtained with scanning is smaller than that obtained without scanning. The weld depth decreases as rotation frequency increases, regardless of the rotation diameter. The bead width obtained with scanning is larger than that obtained without scanning because of the larger laser radiation area. In the welding there is an unscanned area, based on the relationship between laser scanning conditions and welding speed, that makes the weld depth periodic. It was found that welding geometry can be controlled by adjusting scanning parameters. Spatter and surface voids decrease as rotation frequency and diameter increase. It was confirmed a scanning speed over 500Â mm/s suppressed large spatter and surface voids.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Processing Technology - Volume 240, February 2017, Pages 52-59
Journal: Journal of Materials Processing Technology - Volume 240, February 2017, Pages 52-59
نویسندگان
Masanori Miyagi, Xudong Zhang, Yousuke Kawahito, Seiji Katayama,