کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5017927 | 1466724 | 2017 | 26 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Interfacial characterisation of overcasting a cast Al-Si-Mg (A356) alloy on a wrought Al-Mg-Si (AA6060) alloy
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
The microstructure and tensile properties of hybrid Al-Si-Mg (A356) and Al-Mg-Si (AA6060) materials were investigated through overcasting. The solid bonding at AA6060/A356 interface was obtained under as-cast condition and T7 heat-treated condition. The oxide film on the surface of the AA6060 inserts was successfully removed by properly designed casting structure and optimised overcasting process. Fine equiaxed primary α-Al grains could be formed at the bonding interface, during which the primary α-Al grains in the A356 alloy were grown up on the primary α-Al grains in the solid inserts of AA6060 alloy. EBSD results revealed that these two types of primary α-Al grains exhibited the same orientation, indicating the cast A356 alloy and the wrought AA6060 alloy shared one primary α-Al grain at the interface. The interfacial bonding strength was measured at a level of 180 MPa. Heat-affected zone was not significant in the overcast structure because the decrease of the ultimate tensile strength of overcast arts was only 3-5% in comparison with the properties of the original AA6060 alloys under aged condition.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Processing Technology - Volume 243, May 2017, Pages 197-204
Journal: Journal of Materials Processing Technology - Volume 243, May 2017, Pages 197-204
نویسندگان
Yijie Zhang, Shouxun Ji, Geoff Scamans, Zhongyun Fan,