کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
5021706 1469377 2017 22 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Durability of joints made with threaded steel rods glued in chestnut timber - An experimental approach
ترجمه فارسی عنوان
دوام مفاصل ساخته شده با میله های فولادی رشته ای چوب درخت بلوط - یک روش آزمایشی
ترجمه چکیده
این مقاله نتایج یک مطالعه تجربی را که بر روی مفاصل ساخته شده با میله های چسب دار در شاه بلوط لمینت ساخته شده است، نشان می دهد که میله ها به صورت موازی با دانه قرار گرفته اند. سه طول لنگر استفاده شده است. قطعات آزمایشی به آزمون کشش فشرده سازی تا شکست پس از سه حالت مختلف قبلی ارائه شده است: حفظ محیطی نرمال شده، چرخه های هوازدگی فشرده مصنوعی و شرایط آب و هوایی تحت بار کاری یکسان. نتایج نشان می دهد که چرخه های پیری باعث کاهش قطر سختی و کشش در مفاصل با طول لنگرگاه های معمول در عمل می شوند. بنابراین تفاوت معناداری در ارزش این تلفات ناشی از عمل بار خدمات در طول چرخه های هوازدگی شتاب وجود ندارد.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی (عمومی)
چکیده انگلیسی
This paper presents the results of an experimental study developed on joints made with glued-in rods in glued laminated chestnut, with the rods inserted parallel to the grain. Three anchor lengths have been used. The test pieces have been submitted to pull-compression test until failure after three different previous conditionings: preservation in a normalized atmosphere, artificial accelerated weathering cycles, and climate conditioning under uniform service load. The results indicate that the aging cycles lead to drops of stiffness and pull-out strength in the joints with usual anchorage lengths in practice. Therefore, there is not a significant difference in the value of those losses due to the action of the service load during the accelerated weathering cycles.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composites Part B: Engineering - Volume 108, 1 January 2017, Pages 413-419
نویسندگان
, , ,