Implementation of the direct integration from CAM to CAE for the PCB simulation

• The direct and automatic translation methodology from CAM to CAE is suggested.
• This method is base on the MPA which is developed for CAD data translation.
• Automatic PCB model simplification methodology for CAE is also suggested.
• Using suggested method time wasting and errors during the PCB simulation are reduced dramatically.

Currently, an engineering analysis before manufacturing is an essential process in nearly every industry. To obtain more accurate results from an engineering analysis, the input data for the CAE system which performs the analysis should be well translated from the original data, such as CAD data or CAM data. However, in a company producing printed circuit boards (PCBs), it takes too much time to obtain CAE data from the original CAM data because a CAD system is typically located between the two systems. Most of the time is wasted when attempting to translate the shape information and when modifying the errors that arise during the manual work involved in the process. In this study, a new methodology for the direct and automatic translation from a CAM system to a CAE system is suggested. This methodology is based on macro-parametric methodology that is developed for exchanges of CAD data.