کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
514421 | 866737 | 2006 | 15 صفحه PDF | دانلود رایگان |
Well-known problems which occur for mixed or underintegrated element formulations are artificial kinematics resp. numerical instabilities. These problems are also observed for 3D-shell elements as the so-called solid-shell elements especially when the loading leads to a homogeneous stress state. To prevent the elements from artificial kinematical failure a simple procedure is applied which allows to identify critical states. Then the non-necessary element modifications responsible for the numerical instabilities can be taken out.A special application for the solid-shell elements which includes strong constraining are sheet forming problems with high stretching and large local contact pressure especially for layered composite sheets which cannot be modeled with standard 2D-shells. In the second part some numerical examples for the simulation of the forming process for pasted composite sheets are shown.
Journal: Finite Elements in Analysis and Design - Volume 42, Issue 12, August 2006, Pages 1097–1111