Effects and mechanism of ultrasonic irradiation on solidification microstructure and mechanical properties of binary TiAl alloys

In spite of their high temperature and reactivity, the binary TiAl alloys are successfully imposed by the ultrasonic irradiation and the microstructure evolution, solidification behaviors and mechanical properties are elaborately investigated. After ultrasonic irradiation, a high quality ingot without shrinkage defects and element segregation is obtained and the coarse dendrite structure is well modified into fine non-dendrite globular grains. The coarse lamellar colony and lamellar space of Ti44Al alloy is refined from 685 μm to 52 μm and 1185 nm to 312 nm, respectively (similarly, 819 μm to 102 μm and 2085 nm to 565 nm for Ti48Al alloy). For Ti48Al alloy, the α peritectic phase is simultaneously precipitated from the melt as well as the β primary phase before the peritectic reaction and the solidification is transformed into the mixed α-solidifying and β-solidifying. Ultrasonic irradiation promotes the peritectic reaction and phase transformation completely and the phase constituent becomes more close to the equilibrium level. The compressive strength of Ti44Al and Ti48Al alloys are increased from 623 MPa to 1250 MPa and 980 MPa to 1295 MPa, respectively. The grain refinement and dendrite transformation enhance the grain boundary sliding improving the plastic deformation ability. Ultrasonic irradiation significantly accelerates the melt flow and solute redistribution and the main grain refinement mechanism is the cavitation-enhanced nucleation by inclusion activation and heightened supercooling.