Coupled fluid–structure solver: The case of shock wave impact on monolithic and composite material plates

An unstructured adaptive mesh flow solver, a finite element structure solver and a moving mesh algorithm were implemented in the numerical simulation of the interaction between a shock wave and a structure. In the past, this interaction is mostly considered as one-way in the sense that the shock causes a transient load on the structure while it is reflected uneffected by the impact. A fully coupled approach was implemented in the present work which can account for the effects associated with a mutual interaction. This approach included a compressible flow Eulerian solver of second order accuracy in finite volume formulation for the fluid and a Langargian solver in finite element formulation for the solid structure. A novel implementation of advancing front moving mesh algorithm was made possible with the introduction of a flexible and efficient quad-edge data structure. Adaptive mesh refinement was introduced into the flow solver for improved accuracy as well. Numerical results are further validated by theoretical analysis, experimental data and results from other numerical simulations. Grid dependency study was performed and results showed that the physical phenomena and quantities were independent of the numerical grid chosen in the simulations. The results illuminated complicated flow phenomena and structure vibration patterns, which in order to be detected experimentally require capabilities beyond those of the current experimental techniques. The numerical simulations also successfully modelled the aero-acoustic damping effects on the structure, which do not exist in previous numerical models. Further analysis of the results showed that the mutual interaction is not linear and that the non-linearity arises because the wave propagation in the fluid is not linear and it cascades a non-linear and non-uniform loading on the plate. Non-linearity intensifies when the plate is vibrating at high frequency while the wave propagation speed is low.