کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5429707 | 1508702 | 2010 | 11 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Radiation transfer in metallic powder beds used in laser processing Radiation transfer in metallic powder beds used in laser processing](/preview/png/5429707.png)
Two-dimensional radiation transfer in a powder layer backed with a substrate of the same material and normally irradiated with a narrow axially symmetric bell-like or the flat-top laser beam is numerically calculated. This corresponds to physical experiments with the powder layer of 50 μm thickness and the laser beam diameters 60-120 μm. The powder bed is treated as an equivalent homogeneous absorbing scattering medium, the radiative properties of which are estimated from the optical properties of the solid phase and the morphological parameters of the powder bed. The theoretical analysis shows that the absorptance of a semi-infinite powder bed of opaque particles is a universal function of the absorptivity of the solid phase being independent of the specific surface and the porosity. This is confirmed by literature experimental data. The radial transport of the radiative energy due to scattering of the incident laser beam in the powder layer can considerably reduce the deposited energy at the centre of the beam but the widening of the radial profile of the deposited energy is not pronounced. The fraction of laser energy deposited within the projection of the incident laser beam is evaluated. The efficiencies of laser heating the whole powder/substrate system and the substrate decrease with increasing the reflectivity of the material. More uniform heating of the powder layer can be attained at higher reflectivity.
Journal: Journal of Quantitative Spectroscopy and Radiative Transfer - Volume 111, Issues 17â18, November 2010, Pages 2517-2527