کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5469656 | 1519287 | 2017 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Process Parameter Optimization for Hot Embossing Uniformly Textured UHMWPE Surfaces for Orthopedic Bearings
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
To improve wear properties and reduce friction in orthopedic bearings, UHMWPE surface texturing is a proposed approach to retain fluid, reduce stress in the polymer and promote lubrication in the joint. The objective of this study was to establish a preliminary procedure to texture UHMWPE specimens using a custom die in a hot embosser. Four parameters were varied in subsequent stages: hold pressure, chamber temperature, hold duration and specimen cooling. Each stage was based upon the successful results of the previous stage. A dimple diameter of 96% of the desired diameter was achieved. These parameters will be used to commence a formal procedure to optimize the process using a formal DOE method.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Procedia CIRP - Volume 65, 2017, Pages 163-167
Journal: Procedia CIRP - Volume 65, 2017, Pages 163-167
نویسندگان
Christina Ippolito, Sufujiang Yu, Yong Jun Lai, Tim Bryant,