Numerical simulation of Post Accident Heat Removal in a typical pool-type SFR under severe core relocation scenario

Under a hypothetical core meltdown and relocation scenario in Sodium cooled Fast Reactor (SFR), there may be a chance for reactor main vessel failure if the core debris are allowed to settle at the bottom of this vessel. To avoid this, an in-vessel core catcher assembly is installed in pool type SFRs just above the bottom wall of the main vessel. The function of this assembly is to collect, retain and passively cool the core debris by assisting natural convection decay heat removal from these debris. In this work, the passive decay heat removal from the core debris settled on single-tray-type design of core catcher has been numerically simulated under different amounts of core relocation using a validated 2-D axisymmetric CFD model. The maximum temperature experienced by the debris bed, core catcher plate and the welded joint between the core support structure and the main vessel (i.e., triple point) are evaluated in order to estimate the amount of core relocation that can be safely handled by the primary containment system under Post Accident Heat Removal (PAHR) scenario. The numerical study revealed that the single-tray-type design of core catcher can potentially assist the passive cooling even under the settling of debris material with heat generation equivalent to 60% of the full core on the core catcher. In addition to this, the effect of the size of opening created on grid plate during core relocation on Post Accident Heat Removal (PAHR) is studied for different amounts of core relocation. From this numerical study, the thermal capability of single-tray type in-vessel core catcher of SFR is assessed. The predictions are useful in determining the safe thermal margins available under core relocation scenarios and extending the functionality of single-tray-type core catcher for handling Whole Core Meltdown Accident (WCA) scenario in future SFRs.