Regular articleResolution improvement for enhancing interference fringes of digital holograms with near infrared illuminance

A new resolution improving method of enhancing the interference stripes, which can achieve better reconstruction of the recorded object of infrared digital holography has been proposed in this paper. The experiment is conducted under near infrared illuminance. We create poor quality holograms with very low-resolution interference stripes and enhance it with our new method. The processed holograms have much higher-resolution interference stripes. This method is based on interpolation theory, and we make it works fast, stable and easy to apply. Both the forward and backward interpolation of the oriental and portrait direction of the source pixels have been calculated, and have been used to realize the final aim of resolution improvement. During the experiment, since the responsivity of the CCD is not satisfied with the illuminance laser, which is by design, we also give specific analysis on the experimental setup of our work to make sure the object information can be fully recorded by the optical setup but cannot be reconstructed because of the low-resolution and unobvious of the interference stripes. After the resolution improvement process of the original hologram, the object information can then be fully reconstructed, which is very clear in the paper. Figures and dataflow give evidence and demonstrate the good performance of our method.