A combined multi-channel Wiener filter-based noise reduction and dynamic range compression in hearing aids

Noise reduction (NR) and dynamic range compression (DRC) are basic components in hearing aids, but generally these components are developed and evaluated independently of each other. Hearing aids typically use a serial concatenation of NR and DRC. However, the DRC in such a concatenation negatively affects the performance of the NR stage: the residual noise after NR receives more amplification compared to the speech, resulting in a signal-to-noise-ratio (SNR) degradation. The integration of NR and DRC has not received a lot of attention so far. In this paper, a multi-channel Wiener filter (MWF)-based approach is presented for speech and noise scenarios, where an MWF-based NR algorithm is combined with DRC. The proposed solution is based on modifying the MWF and the DRC to incorporate the conditional speech presence probability in order to avoid residual noise amplification. The goal is then to analyse any undesired interaction effects by means of objective measures. Experimental results indeed confirm that a serial concatenation of NR and DRC degrades the SNR improvement provided by the NR, whereas the combined approach proposed here shows less degradation of the SNR improvement at a low increase in distortion compared to a serial concatenation.

► We present signal processing algorithms related to hearing aids.
► We deal with problems such as background noise and reduced dynamic range.
► We propose a combined noise reduction and dynamic range compression scheme.
► Undesired interaction effects are avoided in the combined approach.
► Result shows less signal-to-noise ratio degradation at low signal distortion.