Vibro-acoustics of a pressurized optical membrane

Optical membranes are currently pursued for their ability to replace the conventional rigid mirrors that are used in space-based telescopes. Among some of the many benefits of using optical membranes is their ability to considerably reduce the weight of the structure. Given the low density of these thin-film membranes, the lower end dynamics play a more significant role than in their rigid plate-like counterparts. Space-based mirrors are subjected to a series of disturbances. Among those encountered are thermal radiation, debris impact, and slewing maneuvers. Thus, being able to model the dynamics appropriately is essential for the adequate performance of thin-film membrane mirrors.With this in mind, the work presented herein uses an impedance based modeling approach to describe the coupled dynamics of a pressurized optical membrane mirror with the end goal of performing vibration suppression of a membrane through acoustic excitation. First the effects of mass loading due to air surrounding a membrane and energy loss due to sound radiation to the far field are modeled in the case of a single membrane. These results are compared to the case of a membrane in vacuum. Second, the membrane is then coupled to a cylindrical cavity where the modeling takes into account the structural acoustic coupling between a cylindrical membrane and a rigid cylindrical cavity, similar to a drum. The coupled model also takes into account the energy loss by sound radiation to the far field due to the membrane's vibration. Third, this paper also looks at using a positive position feedback controller for vibration suppression of the membrane. This is done using a centralized acoustic source at the base of the cavity as the method of actuation. The acoustic actuation is of great interest since it does not mass load the membrane in the conventional way, as most methods of actuation would.

► The work presented herein studies the coupling effects of a circular membrane to an air cavity.
► The effects of air loading and radiation are considered and compared to that of a membrane in vacuum.
► Coupling is carried using an impedance based modeling approach.
► A novel acoustic actuation method is used for vibration suppression.
► The novel approach proves to be feasible as a way of vibration suppression.