Research and practice on fluctuation water injection technology at low permeability coal seam

In order to solve the problem of poor affusion effect on low permeability coal seam, the paper analyzes the micro process of the coal seam water infusion in wetting coal and determines the main factors affecting coal seam water infusion. The permeability of the NO.3 coal seam in east working face of Xingcun coal mine by MTS815.03 servo-controlled rock mechanical test system has been tested. Results show that when the peak stress in coal sample specimens reaches 48.53 MPa, permeability ranges from 0.5158 to 2.9576 × 10−8 Darcy, and it means that the coal seam is low in permeability and difficult in water injection. Based on the characteristics of low permeability and geostress situation, efficient fluctuation water injection technology with permeable agent and relevant process parameters have been designed. The surface tension of the permeable agent developed here is 31.18 m N/m when mass concentration reaches 0.05%. The permeable agent can permeate into 2 cm thick coal layer completely in 10 s, thus improving the wettability of water effectively and the water injection pressure fluctuates between 7 MPa and 25 MPa. The application of the technique in the 3rd coal seam in east working face of Xingcun coal mine shows not only single-arch injection experienced a significant increase on average, from no more than 10 m3 to 63.3886 m3, but also the effect of dust fall, cooling and rock burst prevention is remarkable.

► Fluctuation water injection with low permeability coal seam technology was designed.
► And efficient permeable agent need to add was developed.
► The water injection pressure fluctuated between 7 MPa and 25 MPa.
► Average injection of single-arch increase from no more than 10 m3 to 63.3886 m3.
► The effect of dust fall, cooling and rock burst prevention is remarkable.