Preparation of poly(methyl methacrylate) microcapsules by in situ polymerization on the surface of calcium carbonate particles

Poly(methyl methacrylate) (PMMA) microcapsules were prepared by the in situ polymerization of methyl methacrylate (MMA) and N,N′-methylenebisacrylamide on the surface of calcium carbonate (CaCO3) particles, followed by the dissolution of the CaCO3 core in ethylenediaminetetraacetic acid solution. The microcapsules were characterized using fluorescence microscopy, atomic force microscopy, scanning electron microscopy, and Fourier transform infrared spectroscopy. The average sizes of the CaCO3 particles and PMMA capsules were 3.8 ± 0.6 and 4.0 ± 0.6 μm, respectively. A copolymer consisting of MMA and rhodamine B-bearing MMA was also used to prepare microcapsules for fluorescent microscopy observations. Fluorescein isothiocyanate-labeled bovine serum albumin was enclosed in the PMMA microcapsules and its release properties were studied.

Figure optionsDownload high-quality image (116 K)Download as PowerPoint slideHighlights
► PMMA microcapsules were prepared by the in situ polymerization on the surface of CaCO3 particles.
► A copolymer consisting of MMA and rhodamine B-MMA was used to prepare capsules.
► FITC-BSA was enclosed in the PMMA capsules and its release properties were studied.