Application of hydrophobic silica based aerogels and xerogels for removal of toxic organic compounds from aqueous solutions

This work is devoted to the application of hydrophobic silica based aerogels and xerogels for the removal of three toxic organic compounds from aqueous solutions. These materials were tested and characterized regarding their morphology, particle size distribution, surface area and porous structure. The equilibrium tests were carried out at different adsorbate concentrations and the experimental data were correlated by means of Langmuir and Freundlich isotherms. The equilibrium data were well described by Langmuir and Freundlich in most cases. The maximum adsorption capacity by Langmuir model was observed for the adsorption of benzene onto aerogel (192.31 mg/g), though the most promising results were obtained for toluene adsorption due to the greater adsorption energy involved. Comparing these results with other reported results, the hydrophobic silica based aerogels/xerogels were found to exhibit a remarkable performance for the removal of benzene and toluene. In addition, the regeneration of previously saturated aerogel/toluene was also investigated by using an ozonation process. The adsorption/regeneration tests with ozone oxidation showed that the aerogel might be regenerated, nevertheless the materials lost their hydrophobicity and thus different methods should be evaluated in forthcoming investigations.

Figure optionsDownload high-quality image (165 K)Download as PowerPoint slideHighlights
► Adsorption of toxic organic compounds by hydrophobic silica-based aerogels/xerogels.
► Adsorption isotherms and correlation with Langmuir and Freundlich models.
► Aerogels exhibit a remarkable performance for removal of benzene and toluene.
► Aerogels show promising adsorption capacity after adsorption/regeneration cycles.