High density silver nanoparticle monolayers produced by colloid self-assembly on polyelectrolyte supporting layers

A stable silver nanoparticle suspension was synthesized via the reduction of silver nitrate using sodium borohydride and sodium citrate. The particle’s shape and size distribution were measured by various methods. The electrophoretic mobility measurements revealed that the zeta potential of particles was highly negative, increasing slightly with the ionic strength, from −52 mV for I = 10–5 M to −35 mV for I = 3 × 10−2 M (for pH = 5.5). The zeta potential of mica modified by the adsorption of cationic polyelectrolytes: PEI and PAH was also determined using the streaming potential measurements. The modified mica sheets were used as substrates for particle monolayers formed via colloid self assembly. The kinetics of this process, proceeding under diffusion-controlled transport conditions, was quantitatively evaluated by a direct enumeration of particles using the AFM and SEM techniques. Both the kinetics of particle deposition and the maximum surface concentration were determined. From the slope of the initial deposition rates, the equivalent diameter of particles was determined to be 16 nm, in agreement with previous measurements. Based on this finding, an efficient method of determining particle size in suspension was proposed. It was also demonstrated that for higher ionic strengths, the maximum coverage of particle monolayers on PAH modified mica exceeded 0.39. The kinetic data were quantitatively interpreted in terms of the random sequential adsorption (RSA) model using the effective hard particle concept.

A method of producing high-density silver particle monolayer was developed.Figure optionsDownload high-quality image (64 K)Download as PowerPoint slideHighlights
► Formation of high density monolayers of silver particle on polyelectrolyte covered mica by the self-assembling.
► The density of silver monolayers can be controlled and designed by changing the ionic strength.
► Efficient method of determining particle size of in bulk was proposed.
► Silver monolayer may find practical applications as antibacterial coatings, in various SERS techniques and in catalysis.