Stabilization and control of rheological properties of Fe2O3/Al(OH)3-rich colloidal slurries under high ionic strength and pH

Controlling the stability and rheological properties of colloidal slurries has been an important but challenging issue for various industries such as cosmetics, ceramic processing, and nuclear waste treatment. For example, at the US Department of Energy Hanford and Savannah River sites, operation of the waste treatment facilities with increased solids loading increases waste processing rates but negatively impacts the rheological properties. We investigated various rheological modifiers on a Fe2O3/Al(OH)3-rich nuclear waste simulant, characterized by high ionic strength and pH, to reduce yield stress of the colloidal slurry. Rheological modifiers change particle interactions in colloidal slurries; they mainly alter the electrostatic and steric interactions, leading to a change in rheological properties. Weak acid-type rheological modifiers strengthen electrostatic repulsion whereas nonionic/polymer surfactant-type rheological modifiers introduce a steric repulsion. Using rheological analysis, it was found that citric acid and polyacrylic acid are good rheological modifiers for the simulant tested, effectively reducing yield stresses by as much as 70%. Further analysis supports the idea that adding these rheological modifiers increases the stability of the slurry. A likely mechanism for the observed effects of citric acid and polyacrylic acid on slurry behavior is identified as both binding cations in bulk solution and adsorption on the surface of the particles.

Significant decreases in yield stress of the AZ-101 pretreated HLW simulant slurry due to citric and polyacrylic acids.Figure optionsDownload high-quality image (103 K)Download as PowerPoint slide