A simple approach to the synthesis of hollow microspheres with magnetite/silica hybrid walls

In this paper, we report a simple approach for templating synthesis of magnetic hollow composite microspheres with magnetite/silica walls. This approach is based on the co-sedimentation of polymer microspheres and magnetic colloids followed by impregnation with silica oligomer from tetraethyl orthosilicate and the further removal of the polymer microspheres by pyrolysis. The diameter of the hollow microspheres can be adjusted in range of 300 nm–2.0 μm300 nm–2.0 μm by using polymer microspheres of different sizes and the wall thickness is tunable from 10–50 nm by controlling ratio of magnetite to the polymer microspheres. Magnetic characterizations show that the hollow microspheres have superparamagnetism with magnetization saturation of 10–30 emu/g. HRTEM and N2 adsorption–desorption isotherms reveal that the hollow microspheres have numerous nanopores in the walls with a broad distribution in the range of 2 to 80 nm, which results in a high BET surface (67.6 m2/g) and pores volume (0.14 cm3/g).

A simple approach is demonstrated for templating synthesis of magnetic hollow microspheres with magnetite/silica walls via co-sedimentation of polymer microspheres and magnetic colloids and impregnation with silica oligomers.Figure optionsDownload as PowerPoint slide