Polanyi-based models for the adsorption of naphthalene from aqueous solutions onto nonpolar polymeric adsorbents

In this research, naphthalene was adopted as the representative model compound of PAHs, and static adsorption of naphthalene from aqueous solution onto three commercial polymeric adsorbents with different pore structure was investigated. Nonlinear isotherms models, i.e., Freundlich, Langmuir, and Polanyi–Dubinin–Manes (PDM) models were tested to fit experimental data, and the experimental data were found to fit well by the PDM model. Through both isotherm modeling and constructing “characteristic curve,” Polanyi theory was useful to describe the adsorption process of naphthalene by polymeric adsorbents, providing evidence that a micropore filling phenomenon was involved during the adsorption process. In addition, a good linear correlation was obtained between the naphthalene adsorption capacities and the micropore volume of adsorbents (VmicroVmicro), whereas no linear relationship was found between the naphthalene adsorption capacities and the specific surface area of adsorbents. Based on the PDM model, the micropore volumes of adsorbents was introduced to normalize the equilibrium adsorbed volume (qvqv), plots of qv/Vmicroqv/Vmicro vs adsorption potential density for naphthalene on three different polymeric adsorbents were collapsed to a single correlation curve, which would be of great benefit to predict the adsorption capacity of adsorbent for the purpose of adsorption engineering design.

Equilibrium volume adsorbed (qvqv) of naphthalene on three polymeric adsorbents was normalized using the micropore volume of adsorbents (VmicroVmicro), plots of qv/Vmicroqv/Vmicro vs adsorption potential density produced a single correlation curve.Figure optionsDownload as PowerPoint slide