Grafting of poly(methyl vinyl ketone) onto aluminum surface

Polymers were grafted on aluminum surfaces in order to modify the chemical and physical properties of the interface. The properly cleaned and activated surface of the aluminum substrate was first “silanized” either with 3-(trimethoxysilyl)propylamine or allyltrimethoxysilane. The grafting was carried out following two methods: (i) by the reaction of preformed poly(methyl vinyl ketone) with the aminosilane-modified surface; and (ii) by polymerization of methyl vinyl ketone with the vinylsilane-modified surface. The modified aluminum surfaces were characterized by X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, and energy dispersive X-ray spectroscopy. The new surfaces were examined by contact-angle measurements, and determinations of the Lewis basicity.

Grafting of poly(methyl vinyl ketone) on amino- and vinyl-modified aluminum surfaces was performed.Figure optionsDownload as PowerPoint slide