کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
618992 | 881837 | 2009 | 14 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Development of a fretting–fatigue mapping concept: The effect of material properties and surface treatments Development of a fretting–fatigue mapping concept: The effect of material properties and surface treatments](/preview/png/618992.png)
Fretting–fatigue induced by combined localized cyclic contact motion and external bulk fatigue loadings may result in premature and dramatic failure of the contacting components. Depending on fretting and fatigue loading conditions, crack nucleation and possibly crack propagation can be activated. This paper proposes a procedure for estimating these two damage thresholds. The crack nucleation boundary is formalized by applying the Crossland high cycle fatigue criterion, taking into account the stress gradient and the ensuing “size effect”. The prediction of the crack propagation condition is formalized using a short crack arrest description. Applied to an AISI 1034 steel, this methodology allows the development of an original material response fretting–fatigue map (FFM). The impact of material properties and surface treatments is investigated.
Journal: Wear - Volume 267, Issue 12, 1 December 2009, Pages 2186–2199