کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
619000 | 881837 | 2009 | 12 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Reproducing wear mechanisms in gear hobbing-Evaluation of a single insert milling test
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
شیمی کلوئیدی و سطحی
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
The main goal of this study was to verify that the wear mechanisms in the developed test correspond with the wear mechanisms obtained in real gear hobbing. Once this was verified, the influence of surfaces roughness on the performance of TiAlN coated HSS inserts was evaluated by using the tool as delivered or after polishing the tool surfaces. Parameters considered were tool wear, cutting forces and the quality of machined surfaces. The polished inserts, yielded less adhered work material and reduced flank wear but no significant difference in cutting forces as compared to the unpolished inserts.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Wear - Volume 267, Issue 12, 1 December 2009, Pages 2257-2268
Journal: Wear - Volume 267, Issue 12, 1 December 2009, Pages 2257-2268
نویسندگان
J. Gerth, M. Werner, M. Larsson, U. Wiklund,