کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
619731 | 1455067 | 2007 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Wear of die after drawing of pickled or reverse bent wire rod
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
شیمی کلوئیدی و سطحی
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
The object of this paper was to evaluate the difference of die wear by using wire rods descaled by two different treatments; pickling or reversed bending. The paper gives a background of wear mechanism and describe a method to estimate die wear in wire drawing. The conclusions of the experiments were that the wire rod preparation seems to be of minor importance for the wear of die. A die in the sixth draft had a magnitude lower wear, compared to the die in the first draft. Abrasive wear is present from the WC grains, torn out in the adhesive wear, on both dies used on pickled wire rod and reverse bent and steel wool cleaned wire rod.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Wear - Volume 262, Issues 7â8, 15 March 2007, Pages 858-867
Journal: Wear - Volume 262, Issues 7â8, 15 March 2007, Pages 858-867
نویسندگان
Peter Gillström, Magnus Jarl,