کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
619855 | 1455064 | 2007 | 14 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
A global-local wear approach to quantify the contact endurance under reciprocating-fretting sliding conditions
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
شیمی کلوئیدی و سطحی
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
An Archard wear formalism is considered and adapted to formalize the abrasive wear responses of hard coating interfaces against an alumina ball under oscillating sliding conditions. Archard wear coefficients are defined and compared versus the respective coating hardnesses. It is shown that for the Ti-V-C system a near linear decrease of the wear rate versus the hardness can be defined. By contrast, the Ti-V-N system promotes significant debris transfer onto the alumina counterbody. The previous two-body abrasion process is then replaced by a three-body abrasion mechanism which significantly modifies the damage phenomena. The coating hardness-wear rate correlation is therefore no longer verified. It is moreover shown that a local approach, focusing on wear depth analysis, is required to predict interface durability. A FEM investigation integrating the wear surface extension demonstrates that the wear depth kinetics can be predicted by considering the accumulated Archard factor density. Simplified analytical formulations are then introduced to generalise this local analysis. Justifying the global-local application of the Archard wear approach, it suggests that interface durability can be related to a single Archard capacity variable (Ï) defined as the maximum accumulated Archard factor density which can be dissipated in the interface before contact failure.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Wear - Volume 263, Issues 1â6, 10 September 2007, Pages 518-531
Journal: Wear - Volume 263, Issues 1â6, 10 September 2007, Pages 518-531
نویسندگان
S. Fouvry, T. Liskiewicz, C. Paulin,