کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6464569 1422874 2017 7 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Preparation of high performance soft magnetic alloy Fe-4Si-0.8P by metal injection molding
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی مهندسی شیمی (عمومی)
پیش نمایش صفحه اول مقاله
Preparation of high performance soft magnetic alloy Fe-4Si-0.8P by metal injection molding
چکیده انگلیسی


- Fe-4Si-0.8P soft magnetic alloy was prepared by metal injection molding.
- The sample with nearly full density was obtained at 1300 °C for 4 h.
- B6000 of 1.59 T, μm of 2467 and Hc of 130 A/m have been obtained.
- Relative high resistivity of 81.2μΩ·cm was acquired.

Fe-4Si-0.8P soft magnetic alloy was prepared by metal injection molding (MIM). Ferrophosphorus liquid phase sintering promoted densification and enhanced magnetic properties. The sample with nearly full density, the saturation induction of 1.59 T, maximum permeability of 2467, coercive force of 130 A/m and resistivity of 81.2 μΩ·cm was obtained at 1300 °C for 4 h. Competitive properties contributed toward achieving low magnetic losses. Therefore, MIM Fe-4Si-0.8P can be widely used in the field of magnetic materials.

61

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Advanced Powder Technology - Volume 28, Issue 10, October 2017, Pages 2687-2693
نویسندگان
, , , , , , ,