Numerical investigation the effects of working parameters on nucleate pool boiling

In the present paper the combination of three-dimensional isothermal and two-dimensional non-isothermal Lattice Boltzmann Method (LBM) are employed to simulate the nucleate pool boiling phenomenon. In order to validate the proposed model, rising bubble phenomenon is simulated afterward the boiling process is investigated by employing a function for heat transfer. The investigation is compared with other numerical works and is found to be in very good agreement. The effects of the parameters including contact angle, heat flux and heater length on departure dimensionless time and departure diameter of bubble are studied. The results show that departure diameter of bubble increases due to the increase of contact angle and decrease of gravity force. Formation, motion and breakup of the bubbles are also investigated as results of gravity force and heat flux. Furthermore, it is worthwhile pointing that out departure diameter of bubble increases as the heat flux increases and increasing of the heater length has more effect in comparison to heat flux on bubble growth. Transient regime is shown by increasing the contact angle and the small bubbles vanishing while rising upward at high gravity force.