کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
653798 | 885215 | 2010 | 7 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Numerical study of natural convection cooling of horizontal heat source mounted in a square cavity filled with nanofluid Numerical study of natural convection cooling of horizontal heat source mounted in a square cavity filled with nanofluid](/preview/png/653798.png)
This paper presents a numerical study of natural convection cooling of a heat source horizontally attached to the left vertical wall of a cavity filled with copper-water nanofluid. The left vertical wall is kept at the constant temperature, while the other ones are kept adiabatic. The numerical approach is based on the finite volume method with a collocated grid arrangement. The SIMPLE algorithm is used for handling the pressure velocity coupling. In this study, the influence of some effective parameters such as: Rayleigh number, location and geometry of heat source and solid concentration are studied and discussed. Results are presented in the form of streamlines, isotherms, and average Nusselt number. The results show that dimension of the heat source is an important parameter affecting the flow pattern and temperature field, so that the average Nusselt number decreases with an increase in the length of the heater. It is also observed that at a given Rayleigh number and definite heat source geometry, the average Nusselt number increases linearly with the increase in the solid volume fraction of nanofluid. The increase of Rayleigh numbers strengthens the natural convection flows which leads to the decrease in heat source temperature. The algorithm and the computer code have been also compared with numerical results in order to verify and validate the model.
Journal: International Communications in Heat and Mass Transfer - Volume 37, Issue 8, October 2010, Pages 1135–1141