کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
653832 | 885217 | 2012 | 6 صفحه PDF | دانلود رایگان |
The paper presents the thermal and hydrodynamic analysis of the micro-heat sink with straight microtubes and multiple inlet jets. The inlet cross-sections have the rectangular shape and positioned tangentially to the tube axis. Four different configurations are considered: three of them with three inlet jets and one with five inlet jets. The fluid flow regime is laminar and water with variable fluid properties is used as a working fluid. The heat flux spread through the bottom surface of the heat sink is q = 100 W/cm2. Thermal and hydrodynamic results of the micro-heat sink with multiple inlets are compared with results obtained for single tangential inlet configuration. For all cases, the analysis is made on a fixed pumping power basis. The strong dependence of the position and number of the inlet jets on thermal and hydrodynamic characteristics of the micro-heat sink is observed.
Journal: International Communications in Heat and Mass Transfer - Volume 39, Issue 2, February 2012, Pages 190–195