Effect of organoclay on the mechanical / thermal properties of microcellular injection molded polystyrene-clay nanocomposites

An organically modified montmorillonite was compounded with polystyrene (PS) in a twin-screw extruder. The organoclay polystyrene nanocomposites were then injection molded by conventional and microcellular methods. Nitrogen was used as the blowing agent. The effect of organoclay content on the mechanical and thermal properties was investigated. The results showed that when the MMT content was 1 wt.%, the nanocomposites have maximum tensile strength, wear resistance, and cell density. Moreover, the addition of organoclay increases the glass transition and decomposition temperature of the nanocomposites. The XRD results showed that the layer spacing of the nanocomposites decreases by comparison with the organoclay. TEM pictures showed that MMT is well dispersed within the PS matrix.