کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
654697 885261 2008 6 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Optimum injection molding processing condition on EMI shielding effectiveness of stainless steel fiber filled polycarbonate composite
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی جریان سیال و فرایندهای انتقال
پیش نمایش صفحه اول مقاله
Optimum injection molding processing condition on EMI shielding effectiveness of stainless steel fiber filled polycarbonate composite
چکیده انگلیسی

Polycarbonate (PC) polymers mixed with conductive stainless steel fiber (SSF) is injection-molded under various injection process conditions. The composite formed is then tested for its capability to shield off electromagnetic field passing through. The effects of four major injection processing parameters including melt temperature, mold temperature, injection velocity and packing pressure on the electromagnetic interference (EMI) shielding effectiveness (SE) of PC filled with conductive SSF have been investigated. Taguchi method is adopted to obtain the optimum set of injection process parameters to acquire the maximum EMI shielding. It is observed that melt temperature and packing pressure significantly affect shielding effectiveness performance for injection-molded PC composites with SSF filler.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Communications in Heat and Mass Transfer - Volume 35, Issue 6, July 2008, Pages 744–749
نویسندگان
, , , ,