کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
655336 1457633 2014 17 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Formation of vortex breakdown in conical-cylindrical cavities
ترجمه فارسی عنوان
تشکیل شکست ناهموار در حفره های مخروطی استوانه ای
ترجمه چکیده
شبیه سازی های عددی در جریان های محرک محدود در این کار انجام شده است تا مشخص شود که شکل گیری پدیده شکست ناهموار چیست. هندسه های استوانه ای استوانه ای و مخروطی، هر دو بسته، در شبیه سازی استفاده می شود. جریان چرخشی بوسیله دیوار پایین، که در سرعت زاویهای ثابت چرخیده است، بوجود می آید. اولا نتایج عددی با نتایج تجربی موجود در منابع مقایسه شده است، با هدف بررسی ظرفیت کد محاسباتی برای پیش بینی پدیده شکست ناهموار. علاوه بر این، چندین شبیه سازی متفاوت پارامترهایی که ویژگی های جریان های تحلیل شده در این کار را تعیین می کنند، یعنی تعداد رینولدز و نسبت ابعاد، انجام شد. در این شبیه سازی ها، محدودیت های رژیم انتقالی و شکل گیری شکست ناهموار مورد تایید قرار گرفت. موارد مداوم و مداوم با مدلسازی آشفتگی شبیه سازی شده بودند. به طور کلی، برخی از جنبه های فرآیند شکست گردابی در هندسه های مخروطی-استوانه ای مشاهده شده اند که از سیلندر متفاوت است.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی جریان سیال و فرایندهای انتقال
چکیده انگلیسی
Numerical simulations in confined rotating flows were performed in this work, in order to verify and characterize the formation of the vortex breakdown phenomenon. Cylindrical and conical-cylindrical geometries, both closed, were used in the simulations. The rotating flow is induced by the bottom wall, which rotates at constant angular velocity. Firstly the numerical results were compared to experimental results available in references, with the purpose to verify the capacity of the computational code to predict the vortex breakdown phenomenon. Further, several simulations varying the parameters which govern the characteristics of the flows analyzed in this work, i.e., the Reynolds number and the aspect ratio, were performed. In these simulations, the limits for the transitional regime and the vortex breakdown formation were verified. Steady and transient cases, with and without turbulence modeling, were simulated. In general, some aspects of the process of vortex breakdown in conical-cylindrical geometries were observed to be different from that in cylinders.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Heat and Fluid Flow - Volume 48, August 2014, Pages 52-68
نویسندگان
, , ,