Effects of 3-D channel blockage and turbulent wake mixing on the limit of power extraction by tidal turbines

Three-dimensional incompressible Reynolds-averaged Navier–Stokes (RANS) computations are performed for water flow past an actuator disk model (representing a tidal turbine) placed in a rectangular channel of various blockages and aspect ratios. The study focuses on the effects of turbulent mixing behind the disk, as well as on the effects of channel blockage and aspect ratio on the prediction of the hydrodynamic limit of power extraction. To qualitatively account for the effect of turbulence generated by the turbine (rather than by the shear flow behind the turbine), we propose a new approach, called a blade-induced turbulence model, which does not use any additional model coefficients other than those used in the original RANS turbulence model. Results demonstrate that the power removed from the mean flow by the disk increases as the strength of turbulent mixing behind the disk increases, being consistent with the turbulent shear stress on the interface between the bypass and core flow passages acting in such a way as to decelerate the bypass flow and accelerate the core flow. The channel aspect ratio also affects the flow downstream of the disk but has less influence upstream of the disk; hence its effect on the limit of power extraction is relatively minor compared to that of the channel blockage, which is shown to be significant but satisfactorily estimated using one-dimensional inviscid theory previously reported in the literature.

► Limit of tidal power extraction is studied using RANS actuator disk computations.
► A new approach is used to account for the effect of turbulence generated at the disk.
► Effect of anisotropic 3D channel blockage is studied and compared to 1D inviscid theory.