کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
655949 | 1457663 | 2009 | 11 صفحه PDF | دانلود رایگان |
The performance of flat fins for tube-fin heat exchangers has been analyzed for both inline and staggered arrangement of tubes. In earlier published studies, regular square and equilateral triangular array tube layouts were considered. No such restriction is put in the present study. The analysis has been done by a semi-analytical technique where the boundary condition at the fin edge is discretely satisfied at a large number of points by a method of collocation. It has also been demonstrated that the approximate results obtained by the sector method closely agree with the prediction of semi-analytical technique. Finally, a generalized scheme of optimization based on Lagrange multiplier technique has been suggested which shows that irrespective of the volume and thickness of the fins, square and equilateral triangular array of tubes are the optimum layout for inline and staggered arrangements, respectively. This result was known so far only intuitively. The optimum dimensions for flat fins for other layout of tubes have also been obtained specifying the ratio of longitudinal to transverse tube pitch.
Journal: International Journal of Heat and Fluid Flow - Volume 30, Issue 4, August 2009, Pages 658–668