کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6588197 1423227 2018 23 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Estimating the hindered-settling flux function from a batch test in a cone
ترجمه فارسی عنوان
برآورد تابع شار ترکیب شده از یک تست بچگانه در یک مخروط
کلمات کلیدی
ترجمه چکیده
عملکرد تسلیم تسلیم شده برای مدل سازی، شبیه سازی و کنترل مخازن ثانویه رسوب می تواند از آزمون های دسته ای تعیین شود. روش متداول این است که سرعت تغییر ناگهانی رابط لجن - سوپرناتانت (پتو لجن) به عنوان تغییر ارتفاع در طول زمان در یک کشتی با مساحت مقطع ثابت. هر یک از این آزمایش ها یک نقطه را بر روی منحنی شارژ فراهم می کند، زیرا در زیر مفروضات ایده آل (تعلیق مونو دی اسپرز، هیچ اثر دیوار) غلظت لجن ثابت فقط در زیر پتو لجن ثابت تا زمانی که برخی از موج از پایین به آن می رسد. روش جدید برآورد شده بر اساس تئوری معادلات دیفرانسیل جزئی جزئی هیدرولیکی غیر خطی به داده های مصنوعی و تجربی اعمال می شود. این روش نشان می دهد که یک بخش قابل توجهی از عملکرد شار از یک تست دسته ای در یک مخزن مخروطی تخمین زده می شود. روش جدید در نظر گرفته می شود که در طی آزمایش ایده آل در یک مخروط، غلظت فقط در زیر پتو لجن در طول زمان افزایش می یابد از زمانی که حجم مواد جامد معلق در طول زمان حجم کم را اشغال می کند.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی مهندسی شیمی (عمومی)
چکیده انگلیسی
The hindered-settling velocity function for the modelling, simulation and control of secondary settling tanks can be determined from batch tests. The conventional method is to measure the velocity of the descending sludge-supernatant interface (sludge blanket) as the change in height over time in a vessel with constant cross-sectional area. Each such experiment provides one point on the flux curve since, under idealizing assumptions (monodisperse suspension, no wall-effects), the concentration of sludge remains constant just below the sludge blanket until some wave from the bottom reaches it. A newly developed method of estimation, based on the theory of nonlinear hyperbolic partial differential equations, is applied to both synthetic and experimental data. The method demonstrates that a substantial portion of the flux function may be estimated from a single batch test in a conical vessel. The new method takes into consideration that during an ideal settling experiment in a cone, the concentration just below the sludge blanket increases with time since the mass of suspended solids occupy a reduced volume over time.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Chemical Engineering Science - Volume 192, 31 December 2018, Pages 244-253
نویسندگان
, , , , ,