کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
666648 | 1458533 | 2012 | 12 صفحه PDF | دانلود رایگان |

A gas–liquid two-phase flow in a large diameter pipe exhibits a three-dimensional flow structure. The wire-mesh sensor (WMS) can acquire a quasi-three-dimensional void fraction distribution. Furthermore, the WMS can acquire a phasic-velocity distribution on the basis of the time lag of void signals between both sets of WMS. Previously, the acquired phasic velocity was one-dimensional distributions.The authors propose a method to estimate the three-dimensional phasic-velocity distribution from the same WMS data. A three dimensional velocity vector was determined on the basis of cross-correlation analysis. The flow direction is determined by the WMS measuring-point combination, whereby the cross-correlation coefficient between both sets of WMS measuring points reveals the peak. In addition, the flow structure can be extracted by size on the basis of a wavelet analysis.The proposed method was applied for two sets of 64 × 64 mesh sensors in an air–water flow in a vertical pipe with inner diameter of 224 mm. The proposed method can successfully visualize a swirl flow structure where large and small bubbles tend to move respectively in inward and outward directions in turn.
Journal: International Journal of Multiphase Flow - Volume 46, November 2012, Pages 75–86