Prediction of the interfacial shear-stress in vertical annular flow

Many improvements of the Wallis correlation for the interfacial friction in annular flow have been proposed in the literature. These improvements give in general a better fit to data, however, their physical basis is not always justified. In this work, we present a physical approach to predict the interfacial shear-stress, based on the theory on roughness in single-phase turbulent pipe flows. Using measured interfacial shear-stress data and measured data on roll waves, which provide most of the contribution to the liquid film roughness, we show that the interfacial shear-stress in vertical annular flow is in very close agreement with the theory. We show that the sand-grain roughness of the liquid film is not equal to four times the mean film thickness, as it is assumed in the Wallis correlation. Instead, the sand-grain roughness is proportional to the wave height, and the proportionality constant can be predicted accurately using the roughness density (or solidity). Furthermore, we show that our annular flow, which is in similar conditions to others in the literature, is fully rough. Hence, the bulk Reynolds number should not appear in the prediction of the interfacial friction coefficient, as is often done in the improvements of the Wallis correlation proposed in the literature.