کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6682330 501846 2016 12 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Effects of design conditions and irreversibilities on the dimensions of ejectors in refrigeration systems
ترجمه فارسی عنوان
تأثیر شرایط طراحی و غیرقابل برگشت بودن بر ابعاد خروجی ها در سیستم های تبرید
کلمات کلیدی
مدل ترمودینامیکی کارایی پلیتتریک، ابعاد ابعاد، تعیین میدان جریان،
ترجمه چکیده
یک مدل ترمودینامیکی برای طراحی اگزوز ها برای توصیف شرایط موجود در سیستم های تبرید توصیف و تایید شده است. بر خلاف مدل های قبلی، در حال حاضر تمام ابعاد انژکتور را تعیین می کند و از کارایی پلیتروپیک (به جای ایزنتروپیک) استفاده می کند، بنابراین با توجه به اثرات نسبت فشار به افزایش آنتروپی در طی فرایندهای شتاب و تاخیر غیر قابل برگشت. نتایج شامل ابعاد و خواص مایع برای یک مورد پایه و همچنین یک مطالعه پارامتری است که تاثیر شرایط ورود و خروجی بر ابعاد و کارایی شتاب، کاهش سرعت و اختلاط را بررسی می کند. مطالعه پارامتریک به محدودیت های توصیه شده از ادبیات منجر به تعیین شرایط طراحی شده است که تکامل محوری فشار، دما و سرعت تعیین می شود. اثرات راندمان پلیتروپیک بر ابعاد انژکتور و کارایی فرایندهای موجود در انژکتور نیز ارائه و تحلیل می شود. همچنین نشان داده شده است که وقتی راندمان مخلوط شدن کاهش می یابد، تلفات اضافی اضافی افزایش می یابد.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی انرژی مهندسی انرژی و فناوری های برق
چکیده انگلیسی
A thermodynamic model for the design of ejectors is described, validated and applied for conditions prevailing in refrigeration systems. Contrary to previous models the present one determines all the dimensions of the ejector and uses polytropic (instead of isentropic) efficiencies thus taking into account the effects of the pressure ratio on the entropy increase during the irreversible acceleration and deceleration processes. The results include dimensions and fluid properties for a base case as well as a parametric study which analyzes the effect of inlet and outlet conditions on the dimensions and efficiencies of the acceleration, deceleration and mixing processes. The parametric study coupled to recommended constraints from the literature leads to the determination of design conditions for which the axial evolution of pressure, temperature and velocity are determined. The effects of the polytropic efficiency on the ejector dimensions and the efficiencies of the processes taking place in the ejector are also presented and analysed. It is also shown that the total exergy losses increase linearly when the mixing efficiency decreases.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Applied Energy - Volume 179, 1 October 2016, Pages 1020-1031
نویسندگان
, , ,