کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6689962 501893 2014 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Thermal and sanitary performance of domestic hot water cylinders: Conflicting requirements
ترجمه فارسی عنوان
عملکرد حرارتی و بهداشتی سیلندرهای آب گرم خانگی: الزامات متضاد
کلمات کلیدی
ترجمه چکیده
به منظور درک مفاهیم بهداشتی در مورد مدیریت تقاضا از سیلندرهای آب گرم خانگی، نمونه های میکروبی از پایین ترین 10 تانک برقی داخلی برقی برقی که عناصر گرمایشی آنها به یک منبع کنترل شده بدون پیک وصل شده بودند، برداشته شد. نتایج نشان داد که غلظت بالایی از باکتری ها در آب و بیوفیلم وجود دارد. غلظت میکروبی با وجود استفاده از هفت ساعت حرارت در ساعات غیر اوج، باقی ماند. بیشتر کارهای عددی و تجربی نشان می دهد که این مشکل به علت حالت های مختلف انتقال حرارت که بالاتر از و در زیر عنصر غوطه ور است غلبه می کند. نتایج حاصل از مدل های حرارتی و رشد باکتری نشان می دهد که امکان دستیابی به شرایط بهداشتی در داخل مخازن استاندارد گرمایی خانگی بدون افزایش قابل توجهی در دمای عنصر گرمایش یا کاهش عناصر گرما از موقعیت فعلی آن غیر ممکن است. افزایش دمای دمای غوطه وری باعث افزایش تلفات حرارتی اضافی می شود، در حالی که کاهش سطح غوطه وری، طبقه بندی حرارتی را منجر به عملیات غیر اقتصادی می شود. دستورالعمل هایی در مورد ذخیره آب گرم در دماهای کافی برای استریلی کردن پاتوژن های انسان مانند لژیونلا، عدم توجه به اختلاف بین عملکرد حرارتی و بهداشتی است. با درک بهتر توزیع دما و باکتری ها در مخازن آب گرم، همراه با خطرات مرتبط، می توان راهبردهای طراحی و کنترل پیشرفته را برای تسهیل مدیریت تقاضای جانبی سیستم های آب گرم در حالی که نیازهای بهداشتی را برآورده کرد، تصویب کرد.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی انرژی مهندسی انرژی و فناوری های برق
چکیده انگلیسی
In order to understand the sanitary implications around the demand side management of domestic hot water cylinders, microbial samples were taken from the bottom of 10 UK domestic electric hot water tanks whose heating elements are connected to a controlled off-peak supply. The results indicated high concentrations of bacteria in the water and biofilm. Microbial concentrations remained high in spite of the application of seven hours of heating during off-peak hours. Further numerical and experimental work shows that this problem arises due to the differing modes of heat transfer that prevail above and below the immersion element. The results from thermal and bacterial growth models suggest that it is impossible to achieve sanitary conditions throughout standard domestic hot water tanks without significantly increasing the heating element temperature or lowering the heating element from its current position. Raising the immersion thermostat temperature results in additional heat losses whilst lowering the immersion position compromises thermal stratification leading to uneconomical operation. Guidelines around storing hot water at temperatures that are sufficient for the purposes of sterilizing human pathogens such as Legionella, fail to take account of the conflict between thermal and sanitary performance. By better understanding the distribution of temperatures and bacteria within hot water tanks along with the associated risks, improved design and control strategies may be adopted to facilitate effective demand side management of hot water systems whilst meeting sanitary requirements.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Applied Energy - Volume 131, 15 October 2014, Pages 171-179
نویسندگان
, , , , ,