کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6694941 1428218 2017 10 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Analysis of sliding mechanism of straight steel fibers in concrete and determine the effect of friction
ترجمه فارسی عنوان
تجزیه و تحلیل مکانیزم کشویی الیاف فولادی مستقیم در بتن و تعیین اثر اصطکاک
کلمات کلیدی
دبیوند، اصطکاک، بتن مسلح فیبر، فیبر فولادی مستقیم، استحکام باند،
ترجمه چکیده
کشیدن فیبرهای فولادی مستقیم در یک ماتریس بتنی سخت شده به عنوان مرحله نهایی مقاومت نیروی کششی محسوب می شود. اگر فیبر دارای طول جداسازی کافی باشد و بار به نیروی حداکثر قابل اعمال برسد، فیبر ممکن است به مقاومت آن برسد و برخی از طول بتن را به دست آورد. شکست بین فاز در استحکام باند به تدریج از طریق بازتاب گذاری بین فضایی آغاز می شود، که تا زمانی که طول پوشش کامل فیبر در بتن را پوشش نمی دهد، پیش می رود. سپس فیبر شروع به مقاومت در برابر نیروهای بیشتر با تنش اصطکاکی می کند که از طریق فرایند کششی اصطکاک ایجاد می شود. این تنش اصطکاک به عنوان یک نیروی برشی موازی عمل می کند و هدف آن تعادل با نیروهای بیشتر است. مجموع تنش های برشی در رابط به تدریج کاهش می یابد به دلیل کاهش تدریجی در طول باقی مانده از فیبر درون بتن، که باعث می شود کاهش تدریجی در ظرفیت بار کششی تا شکستگی کامل در کامپوزیت. در این مقاله پژوهشی، یک روش روشن و تجزیه و تحلیل مکانیزم کشویی از طریق یک مطالعه تجربی معرفی می شود. علاوه بر این، مقایسه ای بین نتایج تجربی و نتایج شبیه سازی ها وجود دارد، در حالی که شبیه سازی های کامپیوتری خاص برای نشان دادن شکل تغییر شکل برای هر فیبر و بتن آماده شده اند، و همچنین توضیح دلایل شکست در چسبندگی در رابط بین فیبر و بتن. در بخش آخر این مقاله یک تحلیل دینامیکی با استفاده از یک مدل تحلیلی به دست آمده است که نشان دهنده هر یک از موارد تجربی و شبیه سازی کامپیوتری است و همچنین یک فرمول مناسب برای تعیین تاثیر اصطکاک نوشته شده است.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی عمران و سازه
چکیده انگلیسی
The sliding of straight steel fiber within a hardened concrete matrix is considered as the final stage of the pull-out force resistance. If the fiber has enough embedment length and the load reaches the applicable maximal force, the fiber may reach its yield strength leaving some length in the concrete. The interfacial-failure in bond strength starts gradually through interfacial debonding, which develops forward until covering whole embedment length of the fiber in the concrete. Then the fiber starts in resisting the further forces by friction stresses which are generated through frictional sliding process. These friction stresses work as an interfacial-shear forces and aim to satisfy the balance with that further forces. The sum of shear stresses at the interface decreases gradually due to gradual decreasing in the remained length of the fiber inside the concrete, what causes gradual decreasing in the tensile load capacity until an overall fracture in the composite. In this research paper, a clarification and an analysis of the sliding mechanism are introduced through an experimental study. In addition to that, there is a comparison between experimental results and simulations results, where specific computer simulations are prepared to show the deformation shape for each of the fiber and the concrete, as well as a clarification of the failure reasons in the adhesion at the interface between the fiber and the concrete. At the last part of this paper, a dynamical analysis has been achieved using an analytical model, which represents each of the experimental cases and the computer simulations, as well as an appropriate formulas govern the effect of the friction have been written.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Archives of Civil and Mechanical Engineering - Volume 17, Issue 3, May 2017, Pages 599-608
نویسندگان
,